Shot blasting
Campbell Machinery Ltd
Campbell Machinery: Specialists in shot blasting and blast cleaning
Pressure blasting



Kerry Ultrasonic - home

Ultrasonic Baths

Microsolve Mono – Solvent

Microsolve Co-Solvent

Ultrasonic Tanks

Ultrasonic Clean Rinse

Ultrasonic Clean Rinse Dry

Microclean Multi Stage

Microclean SC 1000


Submersible Transducers

Autotrans Handling

Ultrasonic Generator



Guyson Pulsatron KC and MKC Ultrasonic Baths

Guyson's range of Kerry ultrasonic cleaning baths provide safe, fast and effective ultrasonic cleaning in a fraction of the time required by hand cleaning. Lightly soiled items such as jewellery may take only seconds; medium soil is normally removed in two minutes or so.

Typical items for cleaning in laboratories and workshops include laboratory glassware, jewellery, clock and watch parts, optical lenses and frames, dental and surgical instruments, printed circuit boards and smaller manufactured parts.

Kerry Ultrasonic Baths

The smaller KC ultrasonic baths, with an approximate capacity of 2 or 3 litres, are easy to use, with a single on/off switch for the ultrasonics. Operating instructions are printed on the bath’s front panel.

The larger microprocessor controlled MKC ultrasonic cleaning baths, available in capacities of 6, 14 and 22 litres (approx), allow the user to pre-set exact cleaning times (up to 99.9 mins) and temperatures (from 20 to 80°C), thus ensuring the same high level of cleanliness every time.

See pictures of each and downloadable pdf's below. Contact us for further details.


Internal tank dims (LxW)
135 x 149
135 x 238
150 x 238
235 x 300
505 x 300
Effective capacity
2 litres
3 litres
6 litres
14 litres
22 litres



Kerry Ultrasonic KC2 Ultrasonic Bath Kerry Ultrasonic KC3 Ultrasonic Bath
Kerry Ultrasonic MKC6 Ultrasonic Bath

KC2 Ultrasonic Bath

KC3 Ultrasonic Bath

MKC6 Ultrasonic Bath


Kerry Ultrasonic MKC14 Ultrasonic Bath
Kerry Ultrasonic MKC22 Ultrasonic Bath

MKC14 Ultrasonic Bath

MKC22 Ultrasonic Bath




To top of page