Shot blasting
Campbell Machinery Ltd
Campbell Machinery: Specialists in shot blasting and blast cleaning
Pressure blasting

 

 

 

 

 

 

SPARE PARTS & ACCESSORIES FOR VAPORMATT

 

Welcome to our Spare Parts section - the only source you need for ALL your blasting requirements. If you cannot find what you want please contact us, we can probably supply the part anyway!

 

We supply Pumps, Hoses, Blast Guns, Blast Gun Nozzles, Abrasive Level Sight Glasses, Cyclones, Vapormatt Slurry, Pipework Systems and Universal Spare Parts.

 

BLAST GUNS

 

Vapormatt Mk.1 Blast Gun

Vapormatt Mk.1 Blast Gun

ITEM
DESCRIPTION
PART NO.


This gun is used on the majority of
Vapormatt machines pre 1997

*
Complete Mk1 blast gun 10mm nozzle, brass NRV.
Complete Mk1 blast gun 12mm nozzle, brass NRV.
A04-036

A04-030
1
Nozzles, all 21mm OD nozzles fit (shown later in this page).

The two most common are :

10mm bore x 53.5mm, boron carbide
12mm bore x 53.5mm, boron carbide.
N000ZG02
N001ZG26
2
Standard body, 40mm thick.
Slim body, 30mm thick.
1001/01
N000ZG31
3
Connection for 3/4" bore hose.
B4-073-013
4
Non-return valve & connection for 1/2" bore air hose, brass.
Non-return valve & connection for 1/2" bore air hose, stainless steel.
A04-015


A04-016

 


 

Vapormatt Mk.2 Gun (Auto Gun)

Vapormatt Mk.2 Gun (Auto Gun)


 

This blast gun may be used as an individual fixed unit or attached to specifically designed manifolds which reduce hoses and simplify repair work by eliminating hose clips and ensuring that the blast stream position is maintained after re-fitting.

ITEM
DESCRIPTION
PART NO.
1
O Ring seal (when used with manifold). B2-009-108
2
Mounting screws, 4 off M6 x 50mm. B6-004-071
3
Connection for 3/4" bore abrasive hose. B4-073-013
4
 Body. N000ZG08
5
Nozzles, all 21mm OD nozzles fit (shown later in this page).

The two most common are :

10mm bore x 53.5mm, boron carbide.

12mm bore x 53.5mm, boron carbide.
N000ZG02
N001ZG26
6
Air jet holder & connection for 1/2" bore air hose. Air jets (not shown) :-

Air jet, 5.0mm bore.
Air jet 5.5mm bore.
Air jet 6.0mm bore.
Air jet 6.5mm bore.
Air jet 7.0mm bore.
N000ZG32

N000ZG33
N000ZG34
N000ZG35
N000ZG36
N000ZG37

 


 

Vapormatt Mk.3 Blast Gun

Vapormatt Mk.3 Blast Gun


The Mk.3 gun is designed to replace the Mk.1 gun in automatic machines, although it is not retro-fittable. Its' attributes include : easy replacement of nozzle, interchangeable air jets, minimal size supply hoses for ease of installation, and non-seizing fixing (i.e. circlip). It can be retro-fitted if new mountings are provided.

ITEM
DESCRIPTION
PART NO.
*
Complete Mk.3 blast gun. A04-104
1
Body. N001ZG13
2
Nozzles, all 21mm OD nozzles fit (shown later in this page). The two most common are :

10mm bore x 53.5mm, boron carbide.
12mm bore x 53.5mm, boron carbide.
N000ZG02
N001ZG26
3
Air jet, 5.5mm bore. N001ZG15
4
Air hose (1m length) and connector. N001ZG14
5
Non-return valve ball. B4-017-002
6

Connection for 3/4" bore abrasive hose.

B4-073-013
*
Circlip for fixing, carbon steel. B2-008-038

 


 

Blast Gun Type "G"

Blast Gun Type "G"


This blast gun is suitable for all makes of blast machine. It incorporates a handle for manual operation but this may be drilled to allow fixing as in an automatic machine. Standard boron carbide nozzles fit, as well as the Vapormatt high efficiency nozzles.

ITEM
DESCRIPTION
PART NO.
*
Complete type "G" blast gun.
1
Connector for 3/4" bore abrasive hose.
B4-007-023
2
Gun body.
B4-007-022
3
Nozzles; all 21mm OD nozzles fit (shown later in this page). The two most common are :

10mm bore x 53.5mm, boron carbide.
12mm bore x 53.5mm, boron carbide.
N000ZG02
N001ZG26
4
Air jet, non-return valve & connection for 1/2" air hose, brass.
B4-007-024

 


 

BLAST GUN NOZZLES

 

 

13th Jan 2010

Pics to follow

ITEM
DESCRIPTION
PART NO.
*
This selection of blast nozzles suit the Vapormatt Mk1, 2 & 3 blast guns, the manifold gun, the type "G" gun and many other makes of blast gun. The ideal material for a blast nozzle is boron carbide. This has a hardness second only to diamond and is very lightweight; however it is friable and also expensive.

Alternatives (in decreasing wear resistance) are :-
  • Tungsten carbide which is much heavier than boron.

  • Hardened carbon steel - much cheaper than either boron or tungsten carbide.
  • Stainless steel - a similar price to carbon steel but non corrosive.
  • Increasing nozzle length increases the efficiency of the gun (the abrasive particles attain a higher velocity), and also marginally decreases the blast pattern. However, long nozzles can be difficult to manoeuvre and are very delicate in boron carbide. Vapormatt can supply any nozzle length required in tungsten carbide, carbon or stainless steel, the lengths shown are the most common.
  • Increasing nozzle bore increases the power of the gun, but note that the air jet must be matched to the bore and air consumption will increase.

    Furthermore, slurry flow will increase and the pump and/or pipe work may not be large enough. Campbell Machinery will be pleased to advise.

7.5mm bore x 158mm, tungsten carbide.

10mm bore x 53.5mm, boron cardbide.
10mm bore x 105mm, hardened steel.
10mm bore x 135mm, hardened steel.
10mm bore x 135mm, tungsten carbide.

12mm bore x 53.5mm, boron carbide.
12mm bore x 135mm, tungsten carbide.
12mm bore x 135mm, hardened steel.
12mm bore x 135mm, stainless steel.
12.5mm bore x 265mm, stainless steel.

14mm bore x 53.5mm, boron carbide.
14mm bore x 150mm, stainless steel.

N000ZG94

N000ZG02
N000ZG89
N001ZG53
N000ZG87

N001ZG26
N000ZG95
N001ZG55
N001ZG56
N001ZG24

N001ZG39
N001ZG36

 


To top of page