Established for over 30 years, Vapormatt designs and
manufactures manual and automatic cleaning, peening
& surface finishing machines using their patented
vaporblast wet blast, high pressure water system.
uses water and an abrasive medium accelerated from a nozzle
with compressed air to provide a very effective environmentally
friendly closed loop surface cleaning and conditioning process.
The abrasive particles used in the system can be as fine as
talcum powder but due to the water carrier, no dust or static
electricity is created, and the water buffers and lubricates
the particles on impact, allowing very fine finishes to be
produced without damage to the component.
Bio-degradable degreasing compounds can be added to the water
which further extends the capability of the process - in a
single operation components can be degreased and super-finished.
Filters built into the machine remove on a continuous cycle
the oil and blast debris.
Many different types and sizes of abrasive media can be used;
from Ruby hard alumina to soft plastic.
Vapormatt Circuit Diagram